List of laboratory services

Mottadelli Snc is able to offer a particularly complete chemical, metallurgical and technological laboratory testing service (tensile tests, fatigue tests, hardness tests, metallographic analysis, atmospheric resistance, etc.) in accordance with EN, ISO, UNI standards regarding the following processes:

Painting Process

Galvanic and Chemical Treatments

Zinc plating, Chromium plating, Anodic oxidation, Burnishing, Phosphating, etc.

Heat treatments and Thermochemical Treatments

Tempering, Annealing, Cementation, Nitriding, etc.

Non-conventional treatments

PVD, CVD, etc.

Welding processes

TIG, MIG, MAG, ecc.

Corrosion Tests

Salt spray and CASS corrosion tests with climatic chamber according to ASTM, EN, ISO standards.

Experimental tests and study of innovative cycles related to the processes indicated in accordance with the customer's specifications in compliance with the applicable EN standards.

Our technicians are also able to define the various process and product controls and related monitoring relating to the technological processes described above.

Verification and formalization of procedures, prescriptions and operating instructions in accordance with the current UNI EN ISO 9000 system standards.

 

Our expert are always at your complete disposal for any further clarifications.

Quality and Environment Policy

It is Mottadelli Snc's policy to provide its clients with the products and services in compliance with the requirements agreed upon, thereby satisfying their needs together with the provisions laid down by the social, environmental and safety regulations.

Every Business Function has a part in pursuing the objective set by our policy, by implementing the program and objectives of which they are aware, integrated with an effective Corporate Quality System.

To achieve the objective of the required quality, Mottadelli Snc has adopted the following policies:

• Compliance with national and international regulations in force
• Achievement of the required quality levels at a minimum cost and within the deadline
• No compromise on product safety
• Prevention of setbacks on the production process
• Full cooperation with suppliers
• Sensitization, training and continuous updating of personnel, at all levels
• Continuous improvement through constant comparison of own performance of processes/organization with that of the best competitors
• Full client satisfaction
• Maximum reliability of finished product
• Respect for environment
• Safety at work
• Visibility on respect of ethical and social principles
• Creation of fair competition based on ethics

The Management considers the overall pursuit of Safety at work as an integral part of the Company Quality Policy, and therefore undertakes to ensure that:

• As from the phase of defining new activities or revising existing ones, security aspects are considered an essential part
• The entire structure of the Company personnel, according to their duties and responsibilities, participates in the achievement of the assigned security objectives
• The necessary resources made available for the realization of this policy are adequately used, according to an organic and rational plan.

In short the Company Quality Policy may be summarized as follows:

1. Environmental Quality: called upon to protect the needs of the community, both present and future, as part of sustainable development
2. Quality of Work: aimed at protecting workers' health and safety needs
3. Information Quality: aimed at protecting confidentiality and allowing a correct and effective management of information
4. Ethical Quality: concerns the social responsibility of the company

The task of ensuring and verifying the application and the suitability of the quality management system is entrusted to the General Management to whom specific authority and responsibility has been delegated.